1. Home
  2. Products
  3. Omega Deals AR-15 80% Lower + KAK LPK + Recoil Technologies Trigger + Anti Walk Pins

Omega Deals AR-15 80% Lower + KAK LPK + Recoil Technologies Trigger + Anti Walk Pins

Write a Review
On sale $359.99 $164.99
Retail Price:$359.99
Your Savings:$195.00(54%)
Part Number: CO-21012
Availability: In Stock
Omega Deals AR-15 80% Lower + KAK LPK 
+ Recoil Technologies Trigger + Anti Walk Pins

US Tactical AR-15  80% Lower Receiver 7075 T6 Aluminum Mil-Spec Milled Anchor Harvey Forging

US Tactical 80% Lower Receiver is forged from 7075-T6 aluminum for a superior custom build.  Precision-milled from the high quality forgings of Anchor Harvey.

FEATURES:
80% receiver ships in white and requires completion by the user.   
Operations left to be completed include fire control/trigger group milling, trigger pin, hammer pin, trigger slot, and the safety selector hole. 
This is not an FFL item and requires machining to complete.
These Are The Best Of The Best In 80% Lowers
Returns will not be accepted once the receiver is modified in any way.

SPECIFICATIONS:
Finish: Unfinished 1st Quality 
Style: 80% Finished Lower
Make: AR-15
Mil-Spec Version
Made in the USA

KAK AR-15 "Lite" Lower Parts Kit (Minus Fire Control Group)

KAK AR-15 "Lite" Lower Parts Kit, Features KAK produced parts throughout. No Fire Control Group. KAK Billet Trigger Guard included! Standard A2 Grip, KAK Stainless Steel springs.

Use this Lower Parts Kit when using your aftermarket Match Trigger

Same as KAK's Standard LPK, but missing the following items
HAMMER
HAMMER SPRING
TRIGGER
TRIGGER SPRING
DISCONNECTOR
DISCONNECTOR SPRING
HAMMER PIN
TRIGGER PIN

Recoil Technologies 3.5lbs "Phantom" Drop in Trigger 

Recoil Technologies 3.5lbs Drop in Trigger AR-15 M4 3.5-lb Drop-In Match Trigger System 

Match Grade trigger pull at 3.5 lbs consistent.

FEATURES:
Single-stage trigger system
3.5-lb. pull weight
Clean break with a short reset
Black 8625 hardcoat anodized aluminum cassette
Comfortable rounded, trigger
Manufactured and assembled in Rise Armaments facility according to strict AS9100 aerospace requirements, which are more stringent than standard gun manufacturing requirements
CNC machined from high-grade, heat-treated tool steel and aluminum
Fits most .308 and .223 AR style platforms
Self-contained design makes it easy and quick to install with no fine-tuning needed
Anti-Rotate/anti-walk pins strongly recommended but not required standard pins will work most of the time, but no pins are included.
Note: The set screw should not be tampered with. under the hammer
.154" trigger pins holes, no .170" Colt available

Instructions for installing Drop-In AR-15 and AR-10 trigger group.

1. If installing in a receiver that already has a trigger and hammer installed, remove the trigger pin and hammer pin and remove the trigger and hammer as well as the grip, safety selector and detent. New receivers, install the drop-in trigger before mounting the grip.
2. Insert the trigger pack into the fire control compartment
3. Insert the hammer and trigger pins. Anti-walk type pins work much better, as standard pins can drop out.
4. Towards the center of the trigger cassette you will see two small set screws. With the trigger and hammer pins in place, push the trigger spring towards the center with your Allen wrench and turn those set screws down to raise the trigger the point that there is pressure created on the trigger and hammer pins which will hold them in place. This step is VERY important and will take care of the slight dimensional differences between lower receivers. 
5. Install the retainers on the anti-walk pins
6. Insert the safety selector switch. The hammer needs to be in the cocked position. Take care as it is inserted to not push the selector into the back extension of the trigger. Replace the safety detent, spring and grip.
7. At this point you can test the trigger pull and reset.  

Premium Recoil Technologies Anti-Walk Pins

Recoil Technologies anti-walk pins are great for drop-in triggers; they replace the original hammer and trigger pins and are retained by special retaining for a positive lock. One side is flared and broached, and the other side is threaded for a screw. Fits small pin lowers (.154"). 

FEATURES:
Made of blackened chrome vanadium tool steel
Corrosion-resistant 
Allen wrench is 1/16th
These are some of the best anti-walk pins on the market.
Retained in the gun, so dirt will not cause a stoppage 
The metal is hard, so there will never be any bending or warping.
Great for drop-in triggers and Mil-Spec triggers.
Works with both forged and billet uppers 
The competition's pins will not work with billet uppers, but ours do. 
Patent pending design 
This is not anti-rotate; it is anti-walk. That means the pins will not fall out.

INCLUDES: 
One blackened finish stainless steel screw
Pins are .154" diameter, and 1.05" long

These pins replace the original hammer and trigger pins. 

Please note: If the listing says "In-Stock" it means we have the item in stock. Please check this LINK to view our most up to date shipping status.
Warranty, Returns & Terms: Omega Tactical Distribution offers a 30 day return, refund and exchange policy. You must email/call Omega Tactical Distribution and obtain an RMA number prior to any return, refund, or exchange. All returns must include the original order number, receipt or invoice, along with the billing address, shipping address, contact phone numbers, contact emails, and RMA number. Returns, refunds, and exchanges may take up to two weeks, not including transit times, for processing after we have received it. Return shipping costs will be the responsibility of the returning party, with the exception of the wrong item being received or on warranty exchange during the first 30 days after delivery. Items returned for warranty will only be replaced or exchanged, no refund given on warranty items.