Omega Mfg. AR-15 "Figo" Slim Free Float MLok 4" Handguard

Good quality handguard for a good price. Installation is simple- no need for clocking barrel nut to line up gas tube and/or screw holes. Just torque to spec, use any sort of rail mounted accessory to align to guard rail with the receiver rail and tighten the clamp screws.Just be aware of one detail- this is NOT a 4 handguard. It is 4.2. May not seem like much, but a big deal when you have a tight margin in barrel length vs handguard length. If it weren't for the fact that I'm using a thread adapter on the barrel (which conveniently bumps the shoulder forward about 0.2), my suppressor would bottom out against the handguard instead of the shoulder on the barrel threads- not a good situation. Not really an issue if your barrel is considerably longer than the guard, but beware if you're using a barrel in the 4-5 range.Finally, just a note not about this specific product, but this retailer overall- Your shipping costs are ridiculous. $10 shipping charge for a 4 handguard? That wasn't even sent Priority, but 1st Class Package. USPS gives out priority flat rate boxes for free- no weight limit and 2 day shipping to lower 48. Y'all should look into that. The inflated shipping charge would normally have lost you my business- you were saved only by the fact that there aren't many options for handguards this small